Diesel Fuel Filter Water Separator suits Mitsubishi Triton ML MN with bracket

Manufacturer Number: FM622DPK

$316.69
Only 1 Left!


30-micron diesel pre-fuel filter designed to eliminate expensive engine damage by reducing fuel contaminants that could potentially cause blockages if allowed to pass through to the original 2-4 micron filter found in most common rail diesel engines.

30 Micron Diesel Fuel Filter Kit  / Water Separator Pre-Filter

Mitsubishi Triton ML or MN 2.5L 3.2L

ML 2006 -2009

MN 2009 onward

An absolute must for anybody considering an outback trip

Description:

Dirty fuel is becoming an increasingly widespread problem with common rail diesel engines.

Any moisture or contaminants allowed to pass through into the fuel system can potentially damage injectors, pumps and other expensive components, and with injectors costing thousands of dollars per set to replace, the price of repairing this damage can quickly become expensive.

Features:

The Fuel Manager consists of a 30-micron diesel pre-fuel filter designed to eliminate expensive engine damage by reducing fuel contaminants that could potentially cause blockages if allowed to pass through to the original 2-4 micron filter found in most common rail diesel engines.

The System Saver allows the bulk of the contaminant to be removed from the fuel before it reaches your final filter. In addition to this 99.99% of all water in the fuel is removed and dropped into the clear bowl.

The Fuel Manager is easily fitted to any common rail engine as a primary filter to clean dirty fuel before it reaches the system components, and acts as an agglomerator, causing moisture to form droplets of water and collect into a Perspex drain bowl before it has the opportunity to become hazardous. The Perspex bowl allows the filter to function effectively while avoiding damage that can occur in glass by elements such as frost and stones.

Full range of spare parts is available for the Fuel Manager.

Specification:

  • The Fuel Manager basic assembly consists of a cast aluminum header with two inlet and two outlet female threaded ports for fuel line connections. The flexible design has an inlet port on each side, and an outlet port on each side, allow for easy mounting and pipe flow. Unused ports are plugged with the caps provided.
  • Attached to the header is the element, which contains the media to remove water & other contaminants.
  • Suitable for all Diesel engines from 50hp to 350hp (37kw to 261kw) with a maximum fuel operating pressure of 60psi.

Kit Includes:
 

1. Fuel Manager30 micron Filtration Unit
2. mounting bolts, Washers and Nyloc Nuts
3. 1m x Fuel Hose
4. Mitsubishi ML MN 4x4 Filter Bracket

5.90-degree brass fittings
6. 12mm barbed tails
7. Blanking Plugs
8. Hose Clamps
9. 6mm mounting bolts
10. Spare replacement filter

Fitting Instructions:
 

1. Remove the 12mm fuel hose (larger of the 2 hoses) connected to the factory filter.
2. Remove the 2 retaining nuts on top of the factory filter. Remove all electrical plugs and solenoids from the original bracket.
3. Before fitting the bracket in place, fit the solenoid to the bracket using the 6mm bolts and nuts
supplied.
4. Install the bracket under the factory filter and refit the filter and bracket retaining nuts. Refit all
electrical plugs into slots provided in the bracket, as in Picture 1.
5. Install the90 degree elbows and male fittings and blanking plugs to the Fuel Manager using a
sealing past such as Threebond 1110b.
6. Mount the Fuel Manager to the bracket and mount the bracket to the vehicle as in picture 2.
7. Connect hose using the supplied clamps from the tank line to the inlet of the Fuel Manager.
Connect hose and clamps from the outlet of the Fuel Manager to the inlet of the original filter.
ensure the hose is not kinked and secure appropriately. 
8. Pump the hand primer until it goes firm, the fuel system is now bled and the engine is ready to start.
9.Check the whole system for leaks.

Service: 

  • Check the filters for water regularly, and drain as required. 
  • Water will collect at the bottom of the bowl, and appears a different color from the fuel. 
  • Drain water by opening the self-venting drain valve and allowing all water to escape. The see-through bowl is re-usable. 
  • Change the element canister when necessary.

 

 

  • The Fuel Manager consists of a 30-micron diesel pre-fuel filter designed to eliminate expensive engine damage by reducing fuel contaminants that could potentially cause blockages if allowed to pass through to the original 2-4 micron filter found in most common rail diesel engines.
  • The System Saver allows the bulk of the contaminant to be removed from the fuel before it reaches your final filter. In addition to this 99.99% of all water in the fuel is removed and dropped into the clear bowl.
  • The Fuel Manager is easily fitted to any common rail engine as a primary filter to clean dirty fuel before it reaches the system components, and acts as an agglomerator, causing moisture to form droplets of water and collect into a Perspex drain bowl before it has the opportunity to become hazardous.
  • The Perspex bowl allows the filter to function effectively while avoiding damage that can occur in glass by elements such as frost and stones.
  • 12 Month Warranty

What's in the Box?

  • Fuel Manager Diesel Fuel Filter Kit for Mitsubishi Triton‹¨«??????
SKU FM622DPK
Model # FM622DPK
Barcode # 9347794000184
Brand Directions Plus
Shipping Weight 2.9000kg
Shipping Width 0.260m
Shipping Height 0.170m
Shipping Length 0.340m
Shipping Cubic 0.015028000m3

Be The First To Review This Product!

Help other Autobox users shop smarter by writing reviews for products you have purchased.

Write a product review